----890-56-299
series are an outdoor solution 500mW/1000mW
bi-directional booster designed for 2.4GHz
wireless LAN. This unit comes with an easy
plug-and-play installation, which works together
with an Inter-Building Wireless Access point
to improve its operation range and performance.
Certification
- US : US FCC part 15
class B, Sec. 15.247, 15.109
- Europe : Europe ETS 300
328, ETS 301 489-1&17, and CE mark,
EN 60950, EN 55022 Class B, EN 50082-1 1998
- Other : VCCI, Telec
/JATE (Japan)
Features
- Auto adjust to 27 dBm / 30 dBm
- Optimized for 890-56-284/890-56-293 Inter-Building
Wireless Access Point
- Reduce ambient noise and provide superior
signal strength
- Increase the signal range by providing
transmit gain as well as low-noise receive
gain
- Easy and simple installation
Packing List
- Wireless Power Amplifier for Outdoor [
890 - 56 - 299 - 1W ]
- RG 316 Cable with RSMA connector (0.3
Meter) [ 860 - 5303053 - 230 ]
- RG213 Cable with N-TYPE female connector
(50 ohm) [ 860 - 5303054 - 231 ]
- 2 Registration/Warranty Card
Specification
| Function |
spec |
| Operating
Range |
2400-2500MHz |
| Operating
Mode |
Bi - directional, half - duplex
Time Division Duplex, Sences RF carrier
from transmitter and automatically
switches from receive to transmit
mode. |
| Transmit
Gain |
30dB max (automatically
adjusted) |
| Frequency
Response |
+\- 1 over operating range |
| Output
Power |
1 w (+30 dBm)
nominal |
| Tx
Input Power |
4Mw (6 dBm ) minimum, up to 200
mW(+23 dBm) maximum |
| Receiver
Gain |
15 dB typical |
| Noise Figure |
3.5 dB typical |
| Connectors |
N - type, female,
50 0hm |
| Lightning Protection |
Direct DC ground at antenna connector |
| DC
Surge Protection |
At 6 VDC input
from transmission cable |
| Power Consumption |
1 A @ 6V DC or 105-240V AC from
power supply |
| Dimensions |
|
| Bi-directional
amplifier |
4.92”L x 2.76“
W x 1.02” H |
| 5V/1A
DC injector |
3.14”L x 2.23”
W x 1.02” H |
| Operating Temperature |
|
| Bi-directional amplifier |
- 20 C to +70 C |
| 5V/1A DC injector |
- 30 C to +70 C |
| Humidity |
|
| Bi-directional
amplifier |
up to 100% Relative
Humidity |
| 5V/1A
DC injector |
10% to 75% Relative
Humidity |
|
